Experimental study on combustion stability and performance of hydrogen-enriched compressed natural gas of a free-piston linear generator

Free Piston linear Generator (FPLG) engine fueled by compressed natural gas (CNG) has recently gained increased research attention. However, due to the low-velocity burning and poor lean limit of CNG fuel, the FPLG engine combustion stability, performance, and efficiency are still low. Hydrogen has a greater burning velocity with wider flame limits that could extend the lean burn limits and combustion characteristics of CNG. This paper compares pure CNG and 10% hydrogen-enriched CNG at various ignition speeds (0.6 ms, 0.8 m/s, and 1 m/s), injection positions (0 mm, 5 mm, 10 mm and 15 mm), and lambda ratios (0.9, 1.4 and 1.7) on the combustion characteristics, performance, and conversion efficiency are duly discussed. The findings show that the FPLG combustion stability limits increase with the hydrogen addition into the CNG. The CNG in-cylinder pressure increases significantly when the injection position is advanced, whereas the hydrogen addition reduces the influence of the injection position. The heat release rate increases by 15.62% and 23.72% with hydrogen addition, corresponding to the advanced and retarded injection positions. Consequently, the hydrogen addition increases the power RMS to 209.21 W and 232.64 W with an increment of 3.46% and 3.13%, respectively. Conclusively, the hydrogen addition into the CNG evidently shortens the combustion duration while improving the heat release rate, combustion stability, power RMS, Cycle-to-Cycle variation, and conversion efficiency.     

Lightweight reactor design by additive manufacturing for preheating applications using metal hydrides

Thermal energy storage systems based on metal hydrides can be a solution for preheating fuel cells (FCs). They can provide thermal energy at temperatures below −20 °C during startup, while heat at 50 °C during operation is sufficient for regeneration. The challenge of such a system in mobile applications is the final weight specific thermal power. In this study, a reactor design based on additive manufacturing techniques for ~300 g of metal hydride is presented. Here, a reactor (passive) to hydride (active) mass ratio of 0.97 is realized, still reaching high weight specific thermal power of up to 2.1 kW/kg_MH at −20 °C and 8 bar (LmNi_4.91Sn_0.15). Considering the example of preheating a FC from −20 °C in ~120 s, the performance of LaNi₅ and LmNi_4.91Sn_0.15 is studied. While LaNi₅ requires higher regeneration temperatures than LmNi_4.91Sn_0.15 (>40 °C compared to >20 °C), its performance is less sensitive to operative variations due to its nearly ideal thermodynamic characteristic.     

The addition of spices and herbs to vegetables in the National School Lunch Program increased vegetable intake at an urban,economically-underserved,and predominantly African-American high school

Vegetable intake is far below recommendations among African-American adolescents living in economically-underserved urban areas. While the National School Lunch Program (NSLP) helps overcome access barriers, vegetable intake remains challenging and novel interventions are required. A two-year, multi-phase, school-based intervention was conducted at an urban, economically-underserved, and predominantly African-American high school in Baltimore, Maryland to determine whether stakeholder-informed addition of spices and herbs to NSLP vegetables would increase intake. The stakeholder engagement phase included assessment of NSLP vegetable attitudes/preferences among 43 school stakeholders and subsequent student sensory testing. The second phase was conducted in the school cafeteria and consisted of eight weeks comparing student intake of typical vegetable recipes versus otherwise-identical recipes with spices and herbs. 4570 student lunch plates were included in the vegetable intake comparison. Vegetable intake was measured by lunch tray plate waste. Willingness to try vegetables was assessed by the difference between plate waste and estimated mean vegetable served weight. Intake of typical vegetable recipes and vegetable recipes with spices and herbs was compared with student’s t-test. Chi-square test was used to compare willingness to try vegetables. Total vegetable intake was 18.2% higher (8.22 g per meal, p < 0.0001) with spices and herbs than with typical recipes. There were no differences in trying vegetables with spices and herbs, although student-led advocacy was associated with increased trying vegetables with spices and herbs (78.8% with advocacy, 67.5% without advocacy, p < 0.0001). The addition of spices and herbs to vegetables in the NSLP was feasible and associated with small increases in vegetable intake at an urban, economically-underserved, and predominantly African-American high school.     

Thermo-economic analysis of chlor-alkali electrolysis for hydrogen production in the electrochlorination plant: Real case

This study deals with the implementations of electrochemical technology for the on-site production of sodium hypochlorite (NaOCl) and hydrogen from seawater for utilization in the steam power plant. The effects of electrical current and seawater temperature on the performance of electrochlorination system are investigated. The obtained results show that current efficiency increases with increasing electrical current. The current efficiency of the system is calculated as 94% at a maximum electric current with a value of 4000 A and maximum temperature with a value of 30 °C. Electricity consumption increases for the unit generation of available chlorine in the case of both enhancements of electrical current and seawater. Hydrogen generation is directly proportional to the variation of the electrical current. Also, improvement in seawater temperature provides more efficient hydrogen generation. Moreover, energy and exergy efficiencies of the whole system are positively affected by an increase of current. However, energy and exergy efficiencies are determined to be 50.4% and 3.04%, respectively, under the best operational conditions. Besides, the cheapest product cost of the hydrogen gas is calculated as $4.04/kg under the greatest electrical current and seawater temperatures.     

Design and computational analysis of a metal hydride hydrogen storage system with hexagonal honeycomb based heat transfer enhancements-part A

In this study, design and performance analysis is carried out for a 10 kWh metal hydride based hydrogen storage system. The system is equipped with distinctive aluminium hexagonal honeycomb based heat transfer enhancements (HTE) having higher surface area to volume ratio for effective heat transfer combined with low system weight addition. The system performance was studied under different operating conditions. The optimum absorption condition was achieved at 35 bar with water at room temperature as heat transfer fluid where up to 90% absorption was completed in 7200 s. The performance of the reactor was observed to significantly improve upon the addition of the HTE network at a minimal system weight penalty.     

Quaternäre Metall/Metalloxid‐Katalysatoren als Wandkatalysatoren in Mikroreaktoren für Power‐to‐Gas‐Applikationen mittels kombinatorischer Hochdurchsatzmethoden

Catalysts of quaternary composition have been prepared and tested for the Sabatier process. For catalyst syntheses the following techniques have been used: sol‐gel methods, wet impregnation and incipient wetness impregnation. The Sabatier reaction was carried out at temperatures between 520 K and 670 K, pressures of 15 bar and 30 bar using a mixture H₂:CO₂ of 4:1. Activity screening of the microscale wall catalysts was performed by a custom‐built 10‐fold parallel gas‐flow microreactor setup in sequential operating mode. To analyze the gas phase compositions GC‐FID was used.     

High piezoelectric performance and domain configurations of (K0.45Na0.55)0.98Li0.02Nb0.76Ta0.18Sb0.06O3 lead-free ceramics prepared by two-step sintering

Research for high-performance lead-free piezoelectric materials has become an urgent issue from the environmental concern. Very limited attempts on two-step sintering had been made so far. In this study, (K_0.45Na_0.55)_0.98Li_0.02Nb_0.76Ta_0.18Sb_0.06O₃ ceramics were prepared by both conventional sintering and two-step sintering. Piezoelectric properties, microstructure and domain structure were found to change significantly with sintering methods and sintering conditions. Two-step sintering was performed in the way that temperature is first quickly raised to 1180 °C, kept for 1 min, then immediately cooled down to 1120 °C and maintained for a desired time length. The effects of dwelling time on piezoelectric performance and microstructure as well as domain structure were investigated. High piezoelectric properties of d₃₃ = 455 pC/N, k_p = 0.54 and k₃₃ = 0.67 were obtained in a ceramic prepared under the dwelling time of 20 h. This ceramic also possesses a very good piezoelectric thermal-ageing stability over −50 °C–150 °C. Further investigation reveals that this ceramic has a quite uniform grain-size distribution with the average grain size of about 12 μm in microstructure and shows domain patterns of simple parallel stripes with a hierarchical nanodomain structure appearing inside some of broad stripes. The observed excellent piezoelectric performance is considered to associate closely with the unique domain structure.     

Tuning of Active Disturbance Rejection Control with application to power plant furnace regulation

Active Disturbance Rejection Control (ADRC) is emerging as a promising solution in dealing with the unmeasurable disturbances and unknown uncertainties, which are treated in a lumped manner and augmented as an extended state variable. Subsequently, an extended state observer (ESO) is designed to estimate and cancel the combined uncertain term in real time, modifying the uncertain plant to behave like a nominal model consisting of integrators. In the original ADRC formulation, the plant model is assumed to be of delay-free and its order is assumed to be equal to that of the real plant. However, a low-order ADRC is preferred and received a wide acceptance in practice because of its simplicity. Currently, the feasibility of such practice is not clearly revealed as well as its potential dangers. To this end, this paper analyzes the control mechanism from the perspective of the modified plant, which, in turn, would give guidance to parameter tuning. The effect of each parameter on the compensation efficiency and stability conditions of the modified plant is analyzed, based on which a complete tuning procedure for ADRC is developed where the initial settings is derived from the existing PI controller parameters. Finally, the proposed tuning method is experimentally used for a furnace pressure regulation of a 1000MW power plant, validating the feasibility of the low-order ADRC, even in the absence of both dynamic model and the information on the model order.     

GIS气体高压开关在阳煤五矿变电站的应用

针对阳煤五矿广场变电站的高压开关老化问题,为了保证安全性,采用了GIS气体的高压绝缘开关进行了改造。在改造后,变电站的安全性得到了显著提高,设备运行可以节省成本200多万元。